Components list, ECE U401/U211, fall 2006.
- Resistors: Kit in lab, 22 Ohms to 2.2 MOhms. Popular values such as 1k and
10k may need up to 50/section. Others approximately 5-10/section
- Capacitors: 0.001 - 10 microFarad selection. 5-10 of each value per section.
- Infrared LEDs: 15/section.
- Phototransistors: 15/section (more than one type if possible)
- Red LEDs: 25/section
- Green LEDs: 25/section
- Yellow LEDs: 25/section
- Low current diode (1N914 or similar): 25/section
- Low power NPN BJT (2N3904 or similar): 50/section
- Quad NAND Gate IC (7400, 74LS00, or 74S00): 10/section
- Quad OR Gate IC (7432, 74LS32, or 74S32): 10/section
- DPDT Electromechanical Relay/lamp assembly: 8 total
- LM 393 comparator: 15/section
- 555 timer: 25/section
- 741 op-amp: 50/section
- CD 4013 flip-flop: 20/section
- CD 4011 NAND: 10/section
- CD 4001 NOR: 8/section
- CD 4071 OR: 8/section
- CD 4081 AND: 8/section
- 50k Ohm potentiometers: 20/section
- 9V alkaline battery: 10/section
- Battery clips with wire leads: 10/section
- Speakers: 10 total
- Wire: 5 colors, 8 of each color
- Wire strippers: 8 plus spares
- Large protoboard: 7/section
- Small protoboard: 7/section
- Potentiometer trimmer: 8 plus spares
- Banana-clips: 30
- BNC-BNC: 8
- BNC-Banana: 16
- Banana lead kits: 8
- Oscilloscope, signal generator, dual power supply, multimeter: 7/section
plus spares
- 8 60 W light bulbs
- 100 foot measuring tape